LowPass Copy number analysis (GISTIC2)
Esophageal Carcinoma (Primary solid tumor)
16 April 2014  |  analyses__2014_04_16
Maintainer Information
Citation Information
Maintained by Spring Yingchun Liu (Broad Institute)
Cite as Broad Institute TCGA Genome Data Analysis Center (2014): LowPass Copy number analysis (GISTIC2). Broad Institute of MIT and Harvard. doi:10.7908/C18914GZ
Overview
Introduction

GISTIC identifies genomic regions that are significantly gained or lost across a set of tumors. The pipeline first filters out normal samples from the segmented copy-number data by inspecting the TCGA barcodes and then executes GISTIC version 2.0.21 (Firehose task version: 127).

Summary

There were 32 tumor samples used in this analysis: 16 significant arm-level results, 1 significant focal amplifications, and 6 significant focal deletions were found.

Results
Focal results

Figure 1.  Genomic positions of amplified regions: the X-axis represents the normalized amplification signals (top) and significance by Q value (bottom). The green line represents the significance cutoff at Q value=0.25.

Table 1.  Get Full Table Amplifications Table - 1 significant amplifications found. Click the link in the last column to view a comprehensive list of candidate genes. If no genes were identified within the peak, the nearest gene appears in brackets.

Cytoband Q value Residual Q value Wide Peak Boundaries # Genes in Wide Peak
11q13.3 1.5678e-20 1.5678e-20 chr11:69467999-70286916 11
Genes in Wide Peak

This is the comprehensive list of amplified genes in the wide peak for 11q13.3.

Table S1.  Genes in bold are cancer genes as defined by The Sanger Institute: Cancer Gene Census[7].

Genes
CCND1
hsa-mir-548k
CTTN
FGF3
FGF4
PPFIA1
FADD
FGF19
ANO1
ORAOV1
MIR548K

Figure 2.  Genomic positions of deleted regions: the X-axis represents the normalized deletion signals (top) and significance by Q value (bottom). The green line represents the significance cutoff at Q value=0.25.

Table 2.  Get Full Table Deletions Table - 6 significant deletions found. Click the link in the last column to view a comprehensive list of candidate genes. If no genes were identified within the peak, the nearest gene appears in brackets.

Cytoband Q value Residual Q value Wide Peak Boundaries # Genes in Wide Peak
9p21.3 3.4142e-22 3.4142e-22 chr9:21959090-22010600 4
16q23.1 0.0010212 0.0010212 chr16:78589811-78992298 1
2q22.2 0.015854 0.015854 chr2:142380819-142702424 1
3p11.1 0.025299 0.025299 chr3:74312399-94258261 30
7q36.1 0.041608 0.041608 chr7:141204815-159138663 177
6p25.3 0.20887 0.20887 chr6:1-28732470 239
Genes in Wide Peak

This is the comprehensive list of deleted genes in the wide peak for 9p21.3.

Table S2.  Genes in bold are cancer genes as defined by The Sanger Institute: Cancer Gene Census[7].

Genes
CDKN2A
CDKN2B
C9orf53
CDKN2B-AS1
Genes in Wide Peak

This is the comprehensive list of deleted genes in the wide peak for 16q23.1.

Table S3.  Genes in bold are cancer genes as defined by The Sanger Institute: Cancer Gene Census[7].

Genes
WWOX
Genes in Wide Peak

This is the comprehensive list of deleted genes in the wide peak for 2q22.2.

Table S4.  Genes in bold are cancer genes as defined by The Sanger Institute: Cancer Gene Census[7].

Genes
LRP1B
Genes in Wide Peak

This is the comprehensive list of deleted genes in the wide peak for 3p11.1.

Table S5.  Genes in bold are cancer genes as defined by The Sanger Institute: Cancer Gene Census[7].

Genes
hsa-mir-4273
hsa-mir-1324
EPHA3
GBE1
HTR1F
CNTN3
POU1F1
PROS1
ROBO1
ROBO2
CGGBP1
CHMP2B
ZNF654
NSUN3
ARL13B
DHFRL1
CADM2
C3orf38
VGLL3
LOC401074
STX19
LOC440970
FLJ20518
FAM86DP
ZNF717
FRG2C
MIR1324
MIR4273
MIR4795
MIR4444-1
Genes in Wide Peak

This is the comprehensive list of deleted genes in the wide peak for 7q36.1.

Table S6.  Genes in bold are cancer genes as defined by The Sanger Institute: Cancer Gene Census[7].

Genes
EZH2
MLL3
hsa-mir-595
hsa-mir-153-2
hsa-mir-671
hsa-mir-1975
hsa-mir-548f-4
ABP1
CASP2
CDK5
CLCN1
DPP6
EN2
EPHA1
EPHB6
GBX1
MNX1
HTR5A
INSIG1
KCNH2
KEL
NOS3
PIP
PRSS1
PRSS2
TAS2R38
PTPRN2
RARRES2
RHEB
SHH
SLC4A2
SMARCD3
SSBP1
VIPR2
XRCC2
ZYX
ARHGEF5
ZNF212
ZNF282
CUL1
MGAM
ACCN3
PDIA4
UBE3C
FAM131B
FAM115A
DNAJB6
ABCF2
FASTK
ABCB8
PAXIP1
SSPO
CLEC5A
CNTNAP2
GIMAP2
OR2F1
TPK1
ZNF777
TMEM176B
REPIN1
TAS2R3
TAS2R4
PRKAG2
NUB1
TAS2R5
CHPF2
NCAPG2
WDR60
GIMAP4
GIMAP5
TMEM176A
TRPV6
AGK
TRPV5
ACTR3B
KIAA1147
ESYT2
ZNF398
GALNT11
LMBR1
LINC00244
NOM1
LRRC61
ZNF767
TMUB1
KRBA1
OR6W1P
LOC93432
C7orf29
AGAP3
C7orf13
OR9A4
OR9A2
C7orf34
TMEM139
NOBOX
OR2A14
OR6B1
OR2F2
ZNF786
PRSS37
ASB10
PRSS58
RNF32
TRY6
LOC154761
LOC154822
GIMAP8
CRYGN
ZNF425
LOC155060
ZNF746
ATP6V0E2
RBM33
GALNTL5
GIMAP7
ZNF467
GIMAP1
LOC202781
C7orf33
FABP5P3
TAS2R39
TAS2R40
TAS2R41
CNPY1
LOC285889
FLJ40852
LOC285965
FAM115C
ZNF775
LOC285972
ATG9B
TAS2R60
CTAGE6P
OR6V1
OR2A12
OR2A1
WDR86
GSTK1
OR2A25
OR2A5
OR2A7
OR2A20P
LOC401431
OR2A42
MIR153-2
CTAGE15P
OR2A9P
OR2A2
ARHGEF35
GIMAP6
WEE2
ZNF862
LOC645249
ACTR3C
MIR595
LOC728377
LOC728743
LOC730441
MIR671
LOC100124692
LOC100128264
CTAGE4
LOC100128822
LOC100131176
LOC100132707
MOXD2P
ZNF783
MIR548F3
MIR548I4
MIR548F4
MIR548T
MTRNR2L6
MIR3907
LOC100505483
LOC100506585
GIMAP1-GIMAP5
Genes in Wide Peak

This is the comprehensive list of deleted genes in the wide peak for 6p25.3.

Table S7.  Genes in bold are cancer genes as defined by The Sanger Institute: Cancer Gene Census[7].

Genes
IRF4
DEK
HIST1H4I
hsa-mir-3143
hsa-mir-548a-1
BMP6
BPHL
BTN1A1
DSP
E2F3
EDN1
SERPINB1
F13A1
FOXF2
FOXC1
GCNT2
GMDS
GMPR
GPLD1
GPX5
HIST1H1C
HIST1H1D
HIST1H1E
HIST1H1B
HIST1H1T
HIST1H2AE
HIST1H2AD
HIST1H2BD
HIST1H2BB
HIST1H1A
HFE
HIVEP1
ID4
JARID2
MAK
NEDD9
NQO2
SERPINB6
SERPINB9
PRL
RREB1
ATXN1
SLC17A1
SOX4
SSR1
TFAP2A
TPMT
TUBB2A
ZNF165
ZNF184
ZNF187
ZNF192
ZNF193
ZNF204P
ALDH5A1
HIST1H2AI
HIST1H2AK
HIST1H2AJ
HIST1H2AL
HIST1H2AC
HIST1H2AB
HIST1H2AM
HIST1H2BG
HIST1H2BL
HIST1H2BN
HIST1H2BM
HIST1H2BF
HIST1H2BE
HIST1H2BH
HIST1H2BI
HIST1H2BC
HIST1H2BO
HIST1H3A
HIST1H3D
HIST1H3C
HIST1H3E
HIST1H3I
HIST1H3G
HIST1H3J
HIST1H3H
HIST1H3B
HIST1H4A
HIST1H4D
HIST1H4F
HIST1H4K
HIST1H4J
HIST1H4C
HIST1H4H
HIST1H4B
HIST1H4E
HIST1H4L
HIST1H4G
CMAHP
RIPK1
PRPF4B
HIST1H3F
HIST1H2AG
HIST1H2BJ
GCM2
CD83
CDYL
LY86
EEF1E1
FAM65B
ZSCAN12
KIAA0319
NUP153
RANBP9
SLC17A4
SLC17A2
PRSS16
BTN3A3
BTN2A2
ECI2
HMGN4
TRIM38
CAP2
SCGN
FARS2
SLC17A3
RPP40
BTN3A2
BTN3A1
BTN2A1
SIRT5
OR2B6
FAM50B
MYLIP
ABT1
SLC35B3
GMNN
TBC1D7
NRN1
NOL7
FAM8A1
DCDC2
TMEM14C
TDP2
GFOD1
BTN2A3P
ELOVL2
CDKAL1
PAK1IP1
LRRC16A
EXOC2
ACOT13
WRNIP1
DUSP22
LYRM4
MRS2
SLC22A23
MUTED
CCDC90A
KIF13A
ZNF323
ZNF322
ZKSCAN3
ZSCAN16
TXNDC5
C6orf62
OR2B2
TMEM14B
RIOK1
DTNBP1
PGBD1
ADTRP
HIST1H2AH
HIST1H2BK
POM121L2
FOXQ1
SCAND3
HUS1B
NRSN1
SNRNP48
MBOAT1
HDGFL1
C6orf195
PIP5K1P1
ZSCAN12P1
HIST1H2AA
KDM1B
RBM24
RNF182
PHACTR1
C6orf228
SYCP2L
LINC00518
PXDC1
MGC39372
ZSCAN23
NKAPL
TOB2P1
FAM217A
RNF144B
HIST1H2BA
GPX6
LOC285768
LY86-AS1
CAGE1
LOC285819
MYLK4
ZNF391
TUBB2B
C6orf52
KAAG1
NHLRC1
ZKSCAN4
GUSBP2
VN1R10P
HIST1H2APS1
PSMG4
DKFZP686I15217
FLJ23152
LINC00340
C6orf201
ERVFRD-1
HCG11
PPP1R3G
MIR548A1
HULC
LOC729177
TMEM170B
SCARNA27
LOC100130275
LOC100130357
LOC100131289
LINC00240
LOC100270746
MIR3143
MIR3691
LOC100506207
LOC100506409
LOC100507173
LOC100507194
LOC100508120
MUTED-TXNDC5
EEF1E1-MUTED
MIR4639
MIR4645
Arm-level results

Table 3.  Get Full Table Arm-level significance table - 16 significant results found. The significance cutoff is at Q value=0.25.

Arm # Genes Amp Frequency Amp Z score Amp Q value Del Frequency Del Z score Del Q value
1p 2121 0.04 -1.25 0.998 0.23 1.77 0.217
1q 1955 0.31 2.7 0.0281 0.13 -0.103 0.867
2p 924 0.16 -0.998 0.998 0.04 -2.45 0.995
2q 1556 0.13 -0.692 0.998 0.04 -1.95 0.995
3p 1062 0.00 -1.78 0.998 0.66 5.86 9.29e-08
3q 1139 0.52 3.68 0.00156 0.37 1.6 0.217
4p 489 0.14 -1.4 0.998 0.38 1.2 0.387
4q 1049 0.04 -2.09 0.998 0.29 0.864 0.504
5p 270 0.29 -0.0984 0.998 0.32 0.208 0.867
5q 1427 0.00 -2.05 0.998 0.44 3.59 0.00218
6p 1173 0.04 -2.18 0.998 0.19 -0.271 0.867
6q 839 0.00 -2.85 0.998 0.22 -0.356 0.881
7p 641 0.60 4.16 0.000321 0.14 -1.04 0.944
7q 1277 0.45 3.28 0.00527 0.16 -0.493 0.889
8p 580 0.26 -0.108 0.998 0.35 0.864 0.504
8q 859 0.63 4.97 1.36e-05 0.15 -0.756 0.911
9p 422 0.16 -1.24 0.998 0.45 1.93 0.178
9q 1113 0.19 -0.333 0.998 0.22 0.0367 0.867
10p 409 0.17 -1.31 0.998 0.29 -0.02 0.867
10q 1268 0.04 -2.04 0.998 0.23 0.297 0.867
11p 862 0.05 -2.17 0.998 0.32 1.02 0.47
11q 1515 0.09 -1.17 0.998 0.30 1.7 0.217
12p 575 0.42 1.74 0.234 0.29 0.148 0.867
12q 1447 0.12 -0.936 0.998 0.21 0.275 0.867
13q 654 0.21 -0.526 0.998 0.46 2.41 0.0801
14q 1341 0.25 0.702 0.878 0.16 -0.468 0.889
15q 1355 0.07 -1.72 0.998 0.10 -1.32 0.981
16p 872 0.08 -1.9 0.998 0.23 -0.119 0.867
16q 702 0.12 -1.59 0.998 0.24 -0.217 0.867
17p 683 0.20 -0.694 0.998 0.26 -0.0195 0.867
17q 1592 0.28 1.47 0.317 0.12 -0.621 0.909
18p 143 0.20 -1.09 0.998 0.43 1.32 0.342
18q 446 0.11 -1.63 0.998 0.47 2.22 0.105
19p 995 0.07 -1.93 0.998 0.17 -0.833 0.911
19q 1709 0.14 -0.27 0.998 0.14 -0.27 0.867
20p 355 0.37 0.888 0.75 0.23 -0.674 0.909
20q 753 0.41 1.98 0.16 0.00 -2.54 0.995
21q 509 0.20 -0.672 0.998 0.59 3.71 0.00208
22q 921 0.25 0.139 0.998 0.31 0.836 0.504
Xq 1312 0.33 1.63 0.256 0.33 1.63 0.217
Methods & Data
Input
Description
  • Segmentation File: The segmentation file contains the segmented data for all the samples identified by GLAD, CBS, or some other segmentation algorithm. (See GLAD file format in the Genepattern file formats documentation.) It is a six column, tab-delimited file with an optional first line identifying the columns. Positions are in base pair units.The column headers are: (1) Sample (sample name), (2) Chromosome (chromosome number), (3) Start Position (segment start position, in bases), (4) End Position (segment end position, in bases), (5) Num markers (number of markers in segment), (6) Seg.CN (log2() -1 of copy number).

  • Markers File: The markers file identifies the marker names and positions of the markers in the original dataset (before segmentation). It is a three column, tab-delimited file with an optional header. The column headers are: (1) Marker Name, (2) Chromosome, (3) Marker Position (in bases).

  • Reference Genome: The reference genome file contains information about the location of genes and cytobands on a given build of the genome. Reference genome files are created in Matlab and are not viewable with a text editor.

  • CNV Files: There are two options for the cnv file. The first option allows CNVs to be identified by marker name. The second option allows the CNVs to be identified by genomic location. Option #1: A two column, tab-delimited file with an optional header row. The marker names given in this file must match the marker names given in the markers file. The CNV identifiers are for user use and can be arbitrary. The column headers are: (1) Marker Name, (2) CNV Identifier. Option #2: A 6 column, tab-delimited file with an optional header row. The 'CNV Identifier' is for user use and can be arbitrary. 'Narrow Region Start' and 'Narrow Region End' are also not used. The column headers are: (1) CNV Identifier, (2) Chromosome, (3) Narrow Region Start, (4) Narrow Region End, (5) Wide Region Start, (6) Wide Region End

  • Amplification Threshold: Threshold for copy number amplifications. Regions with a log2 ratio above this value are considered amplified.

  • Deletion Threshold: Threshold for copy number deletions. Regions with a log2 ratio below the negative of this value are considered deletions.

  • Cap Values: Minimum and maximum cap values on analyzed data. Regions with a log2 ratio greater than the cap are set to the cap value; regions with a log2 ratio less than -cap value are set to -cap. Values must be positive.

  • Broad Length Cutoff: Threshold used to distinguish broad from focal events, given in units of fraction of chromosome arm.

  • Remove X-Chromosome: Flag indicating whether to remove data from the X-chromosome before analysis. Allowed values= {1,0} (1: Remove X-Chromosome, 0: Do not remove X-Chromosome.

  • Confidence Level: Confidence level used to calculate the region containing a driver.

  • Join Segment Size: Smallest number of markers to allow in segments from the segmented data. Segments that contain fewer than this number of markers are joined to the neighboring segment that is closest in copy number.

  • Arm Level Peel Off: Flag set to enable arm-level peel-off of events during peak definition. The arm-level peel-off enhancement to the arbitrated peel-off method assigns all events in the same chromosome arm of the same sample to a single peak. It is useful when peaks are split by noise or chromothripsis. Allowed values= {1,0} (1: Use arm level peel off, 0: Use normal arbitrated peel-off).

  • Maximum Sample Segments: Maximum number of segments allowed for a sample in the input data. Samples with more segments than this threshold are excluded from the analysis.

  • Gene GISTIC: When enabled (value = 1), this option causes GISTIC to analyze deletions using genes instead of array markers to locate the lesion. In this mode, the copy number assigned to a gene is the lowest copy number among the markers that represent the gene.

Values

List of inputs used for this run of GISTIC2. All files listed should be included in the archived results.

  • Segmentation File = /xchip/cga/gdac-prod/tcga-gdac/jobResults/PrepareGisticDNASeq/ESCA-TP/8143002/segmentationfile.txt

  • Markers File = /xchip/cga/gdac-prod/tcga-gdac/jobResults/PrepareGisticDNASeq/ESCA-TP/8143002/markersfile.txt

  • Reference Genome = /xchip/cga/reference/gistic2/hg19_with_miR_20120227.mat

  • CNV Files = /xchip/cga/reference/gistic2/CNV.hg19.bypos.111213.txt

  • Amplification Threshold = 0.3

  • Deletion Threshold = 0.3

  • Cap Values = 2

  • Broad Length Cutoff = 0.5

  • Remove X-Chromosome = 0

  • Confidence Level = 0.99

  • Join Segment Size = 10

  • Arm Level Peel Off = 1

  • Maximum Sample Segments = 10000

  • Gene GISTIC = 0

Table 4.  Get Full Table First 10 out of 32 Input Tumor Samples.

Tumor Sample Names
TCGA-IG-A3I8-01A-11D-A248-26
TCGA-IG-A3QL-01A-11D-A248-26
TCGA-IG-A3Y9-01A-12D-A248-26
TCGA-IG-A3YA-01A-11D-A248-26
TCGA-IG-A3YB-01A-11D-A248-26
TCGA-IG-A3YC-01A-11D-A248-26
TCGA-IG-A51D-01A-11D-A267-26
TCGA-L5-A43C-01A-11D-A248-26
TCGA-L5-A43E-01A-11D-A248-26
TCGA-L5-A43H-01A-11D-A248-26

Figure 3.  Segmented copy number profiles in the input data

Output
All Lesions File (all_lesions.conf_##.txt, where ## is the confidence level)

The all lesions file summarizes the results from the GISTIC run. It contains data about the significant regions of amplification and deletion as well as which samples are amplified or deleted in each of these regions. The identified regions are listed down the first column, and the samples are listed across the first row, starting in column 10.

Region Data

Columns 1-9 present the data about the significant regions as follows:

  1. Unique Name: A name assigned to identify the region.

  2. Descriptor: The genomic descriptor of that region.

  3. Wide Peak Limits: The 'wide peak' boundaries most likely to contain the targeted genes. These are listed in genomic coordinates and marker (or probe) indices.

  4. Peak Limits: The boundaries of the region of maximal amplification or deletion.

  5. Region Limits: The boundaries of the entire significant region of amplification or deletion.

  6. Q values: The Q value of the peak region.

  7. Residual Q values: The Q value of the peak region after removing ('peeling off') amplifications or deletions that overlap other, more significant peak regions in the same chromosome.

  8. Broad or Focal: Identifies whether the region reaches significance due primarily to broad events (called 'broad'), focal events (called 'focal'), or independently significant broad and focal events (called 'both').

  9. Amplitude Threshold: Key giving the meaning of values in the subsequent columns associated with each sample.

Sample Data

Each of the analyzed samples is represented in one of the columns following the lesion data (columns 10 through end). The data contained in these columns varies slightly by section of the file. The first section can be identified by the key given in column 9 - it starts in row 2 and continues until the row that reads 'Actual Copy Change Given.' This section contains summarized data for each sample. A '0' indicates that the copy number of the sample was not amplified or deleted beyond the threshold amount in that peak region. A '1' indicates that the sample had low-level copy number aberrations (exceeding the low threshold indicated in column 9), and a '2' indicates that the sample had high-level copy number aberrations (exceeding the high threshold indicated in column 9).The second section can be identified the rows in which column 9 reads 'Actual Copy Change Given.' The second section exactly reproduces the first section, except that here the actual changes in copy number are provided rather than zeroes, ones, and twos.The final section is similar to the first section, except that here only broad events are included. A 1 in the samples columns (columns 10+) indicates that the median copy number of the sample across the entire significant region exceeded the threshold given in column 9. That is, it indicates whether the sample had a geographically extended event, rather than a focal amplification or deletion covering little more than the peak region.

Amplification Genes File (amp_genes.conf_##.txt, where ## is the confidence level)

The amp genes file contains one column for each amplification peak identified in the GISTIC analysis. The first four rows are:

  1. Cytoband

  2. Q value

  3. Residual Q value

  4. Wide Peak Boundaries

These rows identify the lesion in the same way as the all lesions file.The remaining rows list the genes contained in each wide peak. For peaks that contain no genes, the nearest gene is listed in brackets.

Deletion Genes File (del_genes.conf_##.txt, where ## is the confidence level)

The del genes file contains one column for each deletion peak identified in the GISTIC analysis. The file format for the del genes file is identical to the format for the amp genes file.

Gistic Scores File (scores.gistic)

The scores file lists the Q values [presented as -log10(q)], G scores, average amplitudes among aberrant samples, and frequency of aberration, across the genome for both amplifications and deletions. The scores file is viewable with the Genepattern SNPViewer module and may be imported into the Integrated Genomics Viewer (IGV).

Segmented Copy Number (raw_copy_number.{fig|pdf|png} )

The segmented copy number is a pdf file containing a colormap image of the segmented copy number profiles in the input data.

Amplification Score GISTIC plot (amp_qplot.{fig|pdf|png|v2.pdf})

The amplification pdf is a plot of the G scores (top) and Q values (bottom) with respect to amplifications for all markers over the entire region analyzed.

Deletion Score GISTIC plot (del_qplot.{fig|pdf|png|v2.pdf})

The deletion pdf is a plot of the G scores (top) and Q values (bottom) with respect to deletions for all markers over the entire region analyzed.

Tables (table_{amp|del}.conf_##.txt, where ## is the confidence level)

Tables of basic information about the genomic regions (peaks) that GISTIC determined to be significantly amplified or deleted. These describe three kinds of peak boundaries, and list the genes contained in two of them. The region start and region end columns (along with the chromosome column) delimit the entire area containing the peak that is above the significance level. The region may be the same for multiple peaks. The peak start and end delimit the maximum value of the peak. The extended peak is the peak determined by robust, and is contained within the wide peak reported in {amp|del}_genes.txt by one marker.

Broad Significance Results (broad_significance_results.txt)

A table of per-arm statistical results for the data set. Each arm is a row in the table. The first column specifies the arm and the second column counts the number of genes known to be on the arm. For both amplification and deletion, the table has columns for the frequency of amplification or deletion of the arm, and a Z score and Q value.

Broad Values By Arm (broad_values_by_arm.txt)

A table of chromosome arm amplification levels for each sample. Each row is a chromosome arm, and each column a sample. The data are in units of absolute copy number -2.

All Data By Genes (all_data_by_genes.txt)

A gene-level table of copy number values for all samples. Each row is the data for a gene. The first three columns name the gene, its NIH locus ID, and its cytoband - the remaining columns are the samples. The copy number values in the table are in units of (copy number -2), so that no amplification or deletion is 0, genes with amplifications have positive values, and genes with deletions are negative values. The data are converted from marker level to gene level using the extreme method: a gene is assigned the greatest amplification or the least deletion value among the markers it covers.

Broad Data By Genes (broad_data_by_genes.txt)

A gene-level table of copy number data similar to the all_data_by_genes.txt output, but using only broad events with lengths greater than the broad length cutoff. The structure of the file and the methods and units used for the data analysis are otherwise identical to all_data_by_genes.txt.

Focal Data By Genes (focal_data_by_genes.txt)

A gene-level table of copy number data similar to the all_data_by_genes.txt output, but using only focal events with lengths greater than the focal length cutoff. The structure of the file and the methods and units used for the data analysis are otherwise identical to all_data_by_genes.txt.

All Thresholded By Genes (all_thresholded.by_genes.txt)

A gene-level table of discrete amplification and deletion indicators at for all samples. There is a row for each gene. The first three columns name the gene, its NIH locus ID, and its cytoband - the remaining columns are the samples. A table value of 0 means no amplification or deletion above the threshold. Amplifications are positive numbers: 1 means amplification above the amplification threshold; 2 means amplifications larger to the arm level amplifications observed for the sample. Deletions are represented by negative table values: -1 represents deletion beyond the threshold; -2 means deletions greater than the minimum arm-level deletion observed for the sample.

Sample Cutoffs (sample_cutoffs.txt)

A table of the per-sample threshold cutoffs (in units of absolute copy number -2) used to distinguish the high level amplifications (+/-2) from ordinary amplifications (+/-1) in the all_thresholded.by_genes.txt output file. The table contains three columns: the sample identifier followed by the low (deletion) and high (amplification) cutoff values. The cutoffs are calculated as the minimum arm-level amplification level less the deletion threshold for deletions and the maximum arm-level amplification plus the amplification threshold for amplifications.

Focal Input To Gistic (focal_input.seg.txt)

A list of copy number segments describing just the focal events present in the data. The segment amplification/deletion levels are in units of (copy number -2), with amplifications positive and deletions negative numbers. This file may be viewed with IGV.

Gene Counts vs. Copy Number Alteration Frequency (freqarms_vs_ngenes.{fig|pdf})

An image showing the correlation between gene counts and frequency of copy number alterations.

Confidence Intervals (regions_track.conf_##.bed, where ## is the confidence level)

A file indicating the position of the confidence intervals around GISTIC peaks that can be loaded as a track in a compatible viewer browser such as IGV or the UCSC genome browser.

GISTIC

GISTIC identifies genomic regions that are significantly gained or lost across a set of tumors. It takes segmented copy number ratios as input, separates arm-level events from focal events, and then performs two tests: (i) identifies significantly amplified/deleted chromosome arms; and (ii) identifies regions that are significantly focally amplified or deleted. For the focal analysis, the significance levels (Q values) are calculated by comparing the observed gains/losses at each locus to those obtained by randomly permuting the events along the genome to reflect the null hypothesis that they are all 'passengers' and could have occurred anywhere. The locus-specific significance levels are then corrected for multiple hypothesis testing. The arm-level significance is calculated by comparing the frequency of gains/losses of each arm to the expected rate given its size. The method outputs genomic views of significantly amplified and deleted regions, as well as a table of genes with gain or loss scores. A more in depth discussion of the GISTIC algorithm and its utility is given in [1], [3], and [5].

CNV Description

Regions of the genome that are prone to germ line variations in copy number are excluded from the GISTIC analysis using a list of germ line copy number variations (CNVs). A CNV is a DNA sequence that may be found at different copy numbers in the germ line of two different individuals. Such germ line variations can confound a GISTIC analysis, which finds significant somatic copy number variations in cancer. A more in depth discussion is provided in [6]. GISTIC currently uses two CNV exclusion lists. One is based on the literature describing copy number variation, and a second one comes from an analysis of significant variations among the blood normals in the TCGA data set.

Download Results

In addition to the links below, the full results of the analysis summarized in this report can also be downloaded programmatically using firehose_get, or interactively from either the Broad GDAC website or TCGA Data Coordination Center Portal.

References
[1] Beroukhim et al, Assessing the significance of chromosomal aberrations in cancer: Methodology and application to glioma, Proc Natl Acad Sci U S A. Vol. 104:50 (2007)
[3] Mermel et al, GISTIC2.0 facilitates sensitive and confident localization of the targets of focal somatic copy-number alteration in human cancers, Genome Biology Vol. 12:4 (2011)
[5] Beroukhim et al., The landscape of somatic copy-number alteration across human cancers, Nature Vol. 463:7283 (2010)
[6] McCarroll, S. A. et al., Integrated detection and population-genetic analysis of SNPs and copy number variation, Nat Genet Vol. 40(10):1166-1174 (2008)